-
Recent Posts
Build Log Archive
Categories
Recent Comments
Meta
Search Results for: rosen
Interior Panels, Rosen Visor, Door Interiors
Today was a short day, but I was able to get a few things done and realized a few additional to-dos. I started by installing the nutplates on the aft door vertical. These will hold the front of the passenger … Continue reading
Rosen Visors, Door Interiors, Heat Ducts, Interior Panels
I started the day with getting some screws I needed to mount the Rosen Visors. I am using some black alloy steel #10 screws that are 3/8″ long. I got the right visor mounted and taped up for protection. Looks … Continue reading
More Door Work, Coat Hanger, Rosen Visor Mounts, Top Mid Skin Prep
Today was an incredibly nice day outside and luckily all this fiberglass work means it’s time to get out in the drive way and sand and sand and sand (and get some sun)! I started by lightly sanding the interior … Continue reading
Battery, Anodizing, Visor Nuts and Seat Day!
Today was a short day. I finally ordered my Odyssey PC925L battery which is a popular battery for this model. It came and I easily set it in the battery tray. I will need to make up a piece to … Continue reading
Right Door Lock Reinforcement, Door Primer, Interior Panel Paint, Final Skin Rivets, Inspection Panel Installations, Overhead Console Outfitting, Start of Left Door
Wow, today was a day full of lots of different projects. Finishing the door interiors takes time between coats of the primer so that leaves plenty of time to get to other items needing attention. Today I started with figuring … Continue reading
Posted in Access Covers and Floor Pans, Aerosport Products, Baggage Compartment, Cabin Doors, Canopy Cover, Control Approach Rudder Pedals, Door Locks, Finish Kit, Fuselage Kit, Industrial Lock and Hardware, Interior, Paint, PlaneAround Center Latch, Primer, Step Installation, Uncategorized, Vans RV10 Project
Leave a comment
Fiberglass Work on Canopy Interior
Now that the overhead console was epoxied into place, I started working on some of the finishing work. I mixed up some West Systems epoxy with 407 Lightweight filler compound. I applied this along the forward edges of the overhead … Continue reading