I have been out of town for a few days working, but I got a little time today after I got back from traveling. I got the rear passenger seat pans cleco’d in and match/final drilled with the ribs. I also cut some piano wire hinge to attach to the baggage floor area pans. These hinge pieces will eventually be used to secure the rear seat bottom cushion in place.
I got the baggage floor pans cleco’d in but haven’t drilled them yet. The conduit I ran the other day still needs to be sured before the floors are buttoned up and I also need to create some antenna doublers for the communications antennas that will be installed under the rear seat bottoms between the ribs.
Once these pans are riveted into place, these areas are very difficult to get into, so it’s important to have everything ready and completed underneath before the areas are buttoned up for good.
myrv10factory 