Category Archives: Front Panel Express

Panel Machining and Engraving

So now that the wiring in the panel area is wrapping up, I can get the final panel labeling and machining completed. The center panel insert around the GTN 750 and the XM Radio is fine as is as it … Continue reading

Posted in Aerosport Products, AFS AutoPilot, AFS Electronic Flight Instrument System, Avionics, ELT, Flight Data Systems CO Detector, Front Panel Express, Garmin, Instrument Panel, Interior, Mountain High Oxygen, Oil System, TSCMR, Vans RV10 Project, XM Radio | Leave a comment

Armrest Assembly, Instrument Panel Final Assembly, PS Engineering PAR 100EX and Garmin GTN750 Backplates

I was eager to see how the final paint work turned out. I soaked some 2000 grit wet/dry paper for an hour and then lightly sanded the armrest and instrument panel pieces to a silky smooth texture. My painting skills … Continue reading

Posted in Aerosport Products, Avionics, Center Armrest, Electrical, Electronics, Front Panel Express, Garmin, Instrument Panel, Interior, Oregon Aero, Paint, PS Engineering, Vans RV10 Project | Leave a comment

Radio Stack Install, XM Radio Mount and Throttle Quadrant Veneer Work

Today I focused on finishing up the radio stack today. Because the rails are longer than the opening of the carbon fiber opening, I had to remove the instrument panel and install the rails and then bolt in the radio … Continue reading

Posted in Aerosport Products, Avionics, Front Panel Express, Garmin, Instrument Panel, Interior, Primer, PS Engineering, Vans RV10 Project, XM Radio | Leave a comment

Instrument Panel Inserts and Mounting Avionics in Panel

After being out of town for a couple of weeks, it was fun to get back to the build today. While I was gone I had ordered the instrument panel inserts from Front Panel Express and provided them with the … Continue reading

Posted in Aerosport Products, AFS AutoPilot, AFS Electronic Flight Instrument System, Avionics, ELT, Front Panel Express, Garmin, Instrument Panel, Mountain High Oxygen, Vans RV10 Project | Leave a comment

Instrument Panel Insert Templatesm, Console Paint and Parking Brake Cable

In preparation for installing the avionics and display systems in the panel, I have been working on designing the metal panel inserts for the instrument panel. I will have these machined (CNC) by a company in Seattle (Front Panel Express). … Continue reading

Posted in Aerosport Products, Antennas, Avionics, Control Approach Rudder Pedals, Control System, Front Panel Express, Interior, Paint, Parking Brake, Primer, Vans RV10 Project | Leave a comment